Posts by Wood Equipment Company
Repair or Replace? What Our Ashland Shop Can Do With Your Worn Pump
The pump in the first photo came into our shop looking like it had been pulled off the bottom of a river. Heavy rust on the upper casing, flaking paint, scale caked around the bearing housing, and decades of hard service written all over it. The pump in the second photo is the same unit…
Read MoreFall Pump Winterization Checklist: Get Your Equipment Ready Before the First Freeze
Every fall we get the same calls. A pump that ran fine all summer cracks a casing after the first hard freeze. A transfer line ices up overnight and a process sits idle for a day. A lift station that nobody checked in October becomes an emergency in January. Almost all of it is preventable.…
Read MoreHot Oil Pumps: What Changes When the Fluid Runs at 600 Degrees
A hot oil pump has one of the hardest jobs in the plant. It moves thermal fluid at 400, 500, or 600°F, around the clock, and everything downstream is waiting on it. The press, the reactor, the fryer, the asphalt tank. When that pump stops, the heat stops moving and so does production. Industrial processes…
Read MoreLift Stations Keep Your Collection System Moving. Is Yours Ready for What’s Next?
Wood Equipment Company | Ashland, Virginia Nobody in town thinks about the lift station until it fails. Then everybody does. Lift stations are the heartbeat of a municipal wastewater collection system. Gravity can only carry sewage so far before the terrain says no, and that’s where a lift station takes over, pumping flow up and…
Read MoreIdle Pumps Can Still Fail: How to Protect Pumps in Storage and Standby
A pump that is not running is not resting. It is slowly getting worse. Some of the most frustrating calls we get start the same way. “We just installed the spare and it won’t turn over.” Or, “The standby pump kicked on during the storm and seized in ten minutes.” The pump looked fine on…
Read MoreWaterJAM 2026: Good to Be Back Among Our People
There is a version of this industry that lives on spec sheets and duty points. And then there is the version that actually runs it, which is a room full of people who know each other’s names, remember what plant you work at, and ask how last year’s project actually turned out. WaterJAM is that…
Read MoreToday, we pause to remember September 11, 2001, a day that forever changed our nation.
Today, we pause to remember September 11, 2001, a day that forever changed our nation. Twenty-five years ago, 19 terrorists hijacked four commercial airliners and carried out coordinated attacks against the United States. Two aircraft struck the Twin Towers of the World Trade Center in New York City, one struck the Pentagon, and a fourth…
Read MoreNETZSCH Progressive Cavity Pumps: Precision for the Toughest Media
Some pumps are built for water. Progressive cavity pumps are built for everything water pumps cannot handle. Thick, abrasive, shear sensitive, high viscosity, full of solids. That is the everyday reality for a lot of the media moving through wastewater plants, food and beverage lines, and industrial processes across the country. A centrifugal pump asked…
Read MoreWEC Is Headed to WEFTEC 2026
Wood Equipment Company is packing up for New Orleans. WEFTEC, the Water Environment Federation’s Annual Technical Exhibition and Conference, is the largest water quality event in the world, and we will be there September 26 through 30 at the Ernest N. Morial Convention Center. If you work in water or wastewater, you already know why…
Read More39 Years and Counting: Celebrating Melody Edwards at Wood Equipment Company
Some milestones are worth stopping the week for. This is one of them. Melody Edwards joined Wood Equipment Company in 1987. Nearly four decades later, her expertise and dedication continue to set the standard for everyone around her. Thirty nine years is not a number most careers reach anywhere, let alone at one company. It…
Read More