Products
Repair or Replace? What Our Ashland Shop Can Do With Your Worn Pump
The pump in the first photo came into our shop looking like it had been pulled off the bottom of a river. Heavy rust on the upper casing, flaking paint, scale caked around the bearing housing, and decades of hard service written all over it. The pump in the second photo is the same unit…
Read MoreHot Oil Pumps: What Changes When the Fluid Runs at 600 Degrees
A hot oil pump has one of the hardest jobs in the plant. It moves thermal fluid at 400, 500, or 600°F, around the clock, and everything downstream is waiting on it. The press, the reactor, the fryer, the asphalt tank. When that pump stops, the heat stops moving and so does production. Industrial processes…
Read MoreLift Stations Keep Your Collection System Moving. Is Yours Ready for What’s Next?
Wood Equipment Company | Ashland, Virginia Nobody in town thinks about the lift station until it fails. Then everybody does. Lift stations are the heartbeat of a municipal wastewater collection system. Gravity can only carry sewage so far before the terrain says no, and that’s where a lift station takes over, pumping flow up and…
Read MoreIdle Pumps Can Still Fail: How to Protect Pumps in Storage and Standby
A pump that is not running is not resting. It is slowly getting worse. Some of the most frustrating calls we get start the same way. “We just installed the spare and it won’t turn over.” Or, “The standby pump kicked on during the storm and seized in ten minutes.” The pump looked fine on…
Read MoreNETZSCH Progressive Cavity Pumps: Precision for the Toughest Media
Some pumps are built for water. Progressive cavity pumps are built for everything water pumps cannot handle. Thick, abrasive, shear sensitive, high viscosity, full of solids. That is the everyday reality for a lot of the media moving through wastewater plants, food and beverage lines, and industrial processes across the country. A centrifugal pump asked…
Read MoreSulzer Pumps in Virginia: What WEC Can Put on Your Floor
When a plant manager in Virginia calls us about a pump that is costing them money, the conversation almost never starts with a brand name. It starts with a problem. Flow is down. Energy cost is up. The seal keeps failing. The unit is thirty years old and nobody makes parts for it anymore. Sulzer…
Read MoreAurora Centrifugal Pumps: Proven Performance You Can Rely On
When a centrifugal pump fails, the ripple effects go far beyond the pump room. Industrial plants lose production time, municipalities risk service interruptions, and commercial facilities face costly downtime that impacts tenants and operations. Choosing the right pump technology from the start is one of the most effective ways to avoid these headaches altogether. That…
Read MoreUnderstanding NPSH: Why Net Positive Suction Head Determines Whether Your Pump Cavitates
Net Positive Suction Head, or NPSH, is one of the most misunderstood concepts in pump selection. It sounds technical, but the idea behind it is simple, and getting it wrong is one of the fastest ways to destroy a pump. The Problem: Why NPSH Gets Overlooked Many pump failures that get blamed on bad equipment…
Read MoreThe Industrial Pumps Market Is Booming. Here Is Why It Matters for Your Operation
The global industrial pumps market has surpassed $43 billion in value and continues to grow at an annual rate of nearly 5 percent. That growth is not happening in a vacuum. It reflects real, measurable demand across water and wastewater treatment, chemical processing, and power generation, three sectors that depend on reliable fluid handling every…
Read MoreWEC Completes Duplex Pump Station Featuring American Marsh Self Priming Pumps
Wood Equipment Company recently commissioned a duplex pump station built around a pair of American Marsh SXT 4×4-10 self priming pumps. The system was engineered to give the customer reliable, hands off operation with smart monitoring built in from day one. System Overview The station pairs two SXT self priming pumps with a duplex control…
Read More